Spiral chute iron ore running tail

Spiral chute iron ore running tail

Spiral chute iron ore tailings: 1. Introduce the beneficiation chute, including the inclined flow separation process. Mineral mortar is applied to a partially inclined chute or inclined surface. With the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The upper part of the light mineral material quickly flows out of the groove, while the lower part of the heavy mineral material stagnates in the inner groove or slowly flows out from the lower part. After distinguishing and connecting, the concentrate and tailings can be obtained. Spiral chutes are machinery for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear screening of ore, large production capacity, high efficiency, high beneficiation enrichment ratio, high recovery probability, and stable operation. It has the advantages of light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong applicability to feed volume and density, Granularity, and grade fluctuation. 2、 Technical principle: The spiral chute separator is not limited to being placed on the cross (or tripod) of the support table. Equal slurry is slowly fed to the spiral groove surface through the feeding chute at the end of the rotating groove head for sorting. The bottom is equipped with a valve block type equipment acquisition slot, allowing other products to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that collects and exports the intercepted variable mineral flows separately. The transverse surface of the fiberglass chute has a very variable slope, which is suitable for the selection of fine particle materials. Spiral Chute Iron Mine Trail 3. Highlights: 1. Stable, easy to operate, and with a large density range. 2. High material production yield, ultra-high enrichment ratio, and high recovery rate. 3. Small usage space, low water consumption, simple structure, and no need for power. 4. Easy installation, easy operation, low investment, and fast profitability. Spiral chute iron ore running tail 4. According to the particle size of the processed ore material, the chute can be divided into three types: (1) Coarse grain chute, with a maximum particle size of 2-3mm or more for feeding, and a maximum of 100-200mm. (2) The ore sand chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding Granularity is less than 0.074MM. 5、 In the application field, the glass fiber reinforced plastic chute is suitable for separating fine iron ore, ferrotitanium ore, chromite ore, pyrite ore, placer tin ore, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon ore and rare earth ore, and has enough density ratio difference to obtain other metals and non gold minerals. Spiral chute iron ore running tail Spiral chute iron ore running tail

Spiral chute iron ore running tail

Spiral chute iron ore running tailRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen