Spiral chute supply

Spiral chute supply

Spiral Chute Supply 1. Introduction Chute beneficiation includes a slope flow beneficiation process. Mineral mortar is fed to some inclined inclined grooves or slopes. With the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The upper part of the light mineral material is quickly discharged to the outside of the groove, while the lower part of the heavy mineral material stagnates in the inner groove or flows out at a slow speed from the lower part. After being obtained, the selected ore and tailings can be obtained. Spiral chutes are mining and beneficiation machinery, especially ideal for sand mining along coasts, rivers, sandbanks, and streams. The product is also characterized by suitable structure, easy installation, small footprint, easy operation, stable beneficiation, clear beneficiation, large processing capacity, high efficiency, ultra-high enrichment ratio, high recovery rate, and stable operation. It has the advantages of small weight, moisture prevention, rust prevention, strong corrosion resistance, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 Production principle: The screening device of the spiral concentrator is not limited to being placed on the cross (or tripod) of the support table. The average ore slurry is slowly fed to the surface of the rotating groove through the feeding groove installed at the end of the spiral groove head for sorting. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) categories radially according to grade. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that gathers and exports the obtained variable mineral flows. The transverse plane of the spiral chute and the slope of the curve vary greatly, making it suitable for the separation of small particle mineral materials. Spiral Chute Supply III. The characteristics of FRP chutes, such as low energy consumption, simple structure, small area occupation, simple operation, stable beneficiation, clear ore separation, no moving parts, convenient Computerized maintenance management system, and strong handling capacity per unit area, have attracted much attention among many gravity separation machines. The equipment has a relatively wide and stable groove surface, and the area where the slurry flows in a laminar flow is large, making it more suitable for processing medium to fine (-4mm) ore particles. China has made spiral chutes with diameters of 400, 600, 900, and 1200mm, Ф The processing capacity of 1200MM four head is about 4-6 tons/hour. Spiral chute supply IV. According to the particle size of processed mineral materials, the chute can be divided into three types: (1) Coarse spiral chute, the maximum Granularity of feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) Mineral sand chute, processing 2-3MM particle grade mineral aggregate. (3) The spiral chute of the ore slurry has a feeding particle size of less than 0.074 millimeters. 5、 The fiberglass chute used in the field can be adapted to the separation of fine iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore and other metal and non-metallic mineral materials with sufficient Density contrast. Spiral Chute Supply Spiral Chute Supply

Spiral chute supply

Spiral chute supplyRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen