Service life of spiral chute

Service life of spiral chute

Introduction to the service life of spiral chutes: 1. Introduction to the process of chute beneficiation, including inclined flow separation. The slurry is fed to a inclined groove or inclined surface, and with the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The lighter minerals in the upper layer are quickly discharged to the outside of the groove, while the heavy ore materials in the lower part stagnate in the inner groove or flow out at a slow speed from the lower part. After being collected separately, the concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are machinery for mining and beneficiation, especially ideal for sand mining and beneficiation in bays, riverbanks, sandbanks, and streams. The product has the characteristics of reasonable structure, simple installation, small footprint, simple operation, stable beneficiation, clear separation of ore, large processing output, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion prevention, and strong applicability to fluctuations in feed volume, density, Granularity, and grade. 2、 The mortar with uniform working principle is slowly fed onto the rotating groove surface through the feeding chute installed on the rotating groove head, and the selection is carried out. The bottom of the spiral groove is equipped with a valve type equipment selection groove, allowing the sorted products to be divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the width of each device, the product gathering hopper aggregates and exports the intercepted variable mineral flow. The cross section of the spiral concentrator and the slope of the curve change greatly, making it suitable for the separation of fine ore particles. Spiral Chute Service Life III. Advantages and Features 1. Stable, easy to operate, and wide concentration range. 2. The processing volume of mineral materials is large, with high enrichment ratio and high recycling rate. 3. It occupies a small area, consumes less water, has a simple structure, and does not require power. 4. Simple installation, easy operation, low investment, and fast returns. The service life of spiral chute is . 4. The chute can be divided into three categories according to the Granularity of the processed ore materials: (1) Coarse grained chute. The maximum feeding particle size is more than 2-3mm, and the maximum feeding particle size is 100-200mm. (2) The ore chute handles 2-3mm sized ore. (3) Slime chute, feeding Granularity is less than 0.074MM. 5、 The application range of fiberglass spiral chute is to handle 0.6-0.03 millimeters or vein ores and minerals, but it is unfavorable for sorting when the mud content is high. At present, it has been widely used for processing iron ore, tungsten, tin ore sand, tantalum niobium, coastal and river placers, and placer gold mines. Spiral chute service life Spiral chute service life

Service life of spiral chute

Service life of spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen