Product information display/Product display

Can the spiral chute be removed after installation and use

24-hour phone/WhatsApp：+8619870423316

Can the spiral chute be removed after installation and use

Can the spiral chute be removed after installation and use? 1. Introduction: The chute selection belongs to the slope flow selection process. Mineral mortar is fed to a partially inclined chute or inclined surface, and with the assistance of water, the mineral particle group becomes loose and layered. The upper layer of light minerals quickly exits the outside of the chute, while the lower layer of heavy minerals stays inside the chute or flows out at low speed from the bottom. After differentiation, the selected ore or tailings are obtained. Spiral chutes are machinery for mining and mineral processing, making them particularly ideal for mining sand deposits in bays, rivers, sandbanks, and streams. The equipment has the characteristics of correct structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, large processing capacity, high efficiency beneficiation and enrichment ratio, high recovery and utilization rate, and reliable operation. It has the advantages of small weight, moisture prevention, rust prevention, corrosion resistance, and strong adaptability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The technical principle is that the slurry is evenly distributed and slowly fed onto the surface of the spiral groove through the feeding groove installed at the head of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type equipment to cut the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be collected and led out differently. The transverse plane of the fiberglass spiral chute has a slope change curve, which is particularly suitable for the separation of small particle materials. 螺旋溜槽安装使用后能拆除吗 Can the spiral chute be removed after installation and use? 3. Characteristics This product is suitable for separating small materials with a particle size of 0.3-0.02mm to obtain iron ore, ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus ethylene, tungsten ore, placer tin ore, tantalite, niobium, and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with gravity differences. This product has the advantages of stable selection process, easy operation, wide range of feeding density, ultra-high enrichment ratio, high recycling probability, small land area occupation, small water consumption, simple structure, no need for power, high output, simple installation, simple operation, small investment, and quick results. Can the spiral chute be dismantled after installation and use? @ @ 000 4. According to the particle size of the processed ore, the chute can be divided into three types: (1) Coarse grain chute, with a maximum particle size of 2-3mm or more for ore feeding and a maximum of 100-200mm. (2) The ore sand chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding Granularity is less than 0.074MM. 5、 Use This product is suitable for separating iron, ferrotitanium, chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin placer, tantalum niobium ore, niobium and other non-ferrous metal ores, rare ore metals or non-metallic minerals with different specific gravity. Can the spiral chute be removed after installation and use