Product information display/Product display

Video of spiral chute selection for sulfuric acid slag beneficiation

24-hour phone/WhatsApp：+8619870423316

Video of spiral chute selection for sulfuric acid slag beneficiation

Spiral chute separation of sulfuric acid slag beneficiation video 1. Overview of chute separation including inclined flow separation steps. Mortar is provided in some inclined grooves or inclined surfaces. With the assistance of flowing water, the mineral particle group is not tightened and layered. The lighter mineral material on the upper part is quickly discharged out of the groove, while the heavy mineral on the lower layer is trapped in the groove or flows out at a low speed from the lower part. After being distinguished and connected, concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are equipment for mining and beneficiation, especially ideal for mineral mining and beneficiation at seaside, riverbank, sand bank, and creek banks. The product also features appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear separation of ore, high processing yield, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture-proof, rust proof, durable and anti-corrosion, and strong applicability to the fluctuation of feed volume or density, Granularity, and grade. 2、 The mineral mortar with the same technical principle is slowly fed to the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head, and then selected for operation. The bottom of the rotating groove is equipped with a valve block type equipment selection groove, which divides the sorted products into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each device, the product gathering hopper allows the intercepted variable mineral flow to be converged and exported separately. The transverse plane of the fiberglass spiral chute is particularly suitable for the separation of fine ore materials when the slope of the curve changes. 螺旋溜槽选硫酸渣选矿视频 Spiral Chute Selection of Sulfuric Acid Slag Beneficiation Video 3. Features 1. Stable and easy to operate sorting steps 2. Allowing for a wide range of feed densities 3. Very high enrichment ratio and high recovery probability 4. Small land occupation and low water consumption 5. Simple structure without power 6. Large processing capacity 7. Easy to install and operate 8. Low investment and quick results. Spiral Chute Selection of Sulfuric Acid Slag Beneficiation Video 螺旋溜槽选硫酸渣选矿视频 4 The structural composition of the fiberglass chute is composed of six parts, including a feeding homogenizer, a feeding chute, a spiral groove, a product acquisition groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove connected by spiral blades is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue) and connected together through screws. The selected surface of the spiral groove has a pre made durable wear-resistant layer. It also has the advantages of lightweight, sturdy, and long-lasting consumables. The rotating groove is equipped with a multi tube feeding homogenizer for ore separation, which is simple and convenient to control. The mineral screening device does not need to be placed on a cross (or tripod) on a support table. The evenly distributed slurry is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is equipped with a valve type new product selection groove, which allows other new products to be divided into three types (or four types) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that densely exports the intercepted variable mineral flows. The transverse surface of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine particle materials. 5、 The application range of fiberglass spiral chute is to handle 0.6-0.03 millimeters or vein ores and minerals, but it is unfavorable for sorting when the mud content is high. At present, it has been widely used for processing iron ore, tungsten, tin ore sand, tantalum niobium, coastal and river placers, and placer gold mines. Spiral chute selection of sulfuric acid slag beneficiation video 螺旋溜槽选硫酸渣选矿视频 Spiral chute selection of sulfuric acid slag beneficiation video