The spiral chute type is good

The spiral chute type is good

The good quality of the spiral chute indicates that the spiral chute is a combination of the characteristics of the spiral concentrator, gravity separation spiral chute, shaking table and gold concentrator. After the relevant scientific research organized by the Ministry of Metallurgical Industry and the operation appraisal of the design, universities, concentrators and other units, it is considered that the mechanical performance is excellent, the separation goal is improved, and it has been awarded the Scientific and Technological Research Achievement Award by the Ministry of Metallurgical Industry. It is now widely used in non-ferrous and Ferrous mines. This equipment is used to separate iron ore, ilmenite, chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin, tantalum niobium, niobium and other non-ferrous metal ores, rare metals and non-metallic minerals with gravity difference from fine materials with a particle size of 0.3-0.02 mm. 2、 Use the method to erect the spiral chute, calibrate the vertical line, use an iron frame or wood to set a suitable position, use the mortar pump to send the sand ore to the two feeding ports above the spiral, enter the increased water, adjust the density of the mineral slurry, the mineral mortar naturally swirls from high to low, and a coherent centrifugal force occurs in the flow speed of the whirling inclined surface, and the gravity, Granularity and morphology of the sand ore are different, The efficiency is obtained by the gravity and centrifugal force of the swirling flow, which separates the ore and sand. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings are discharged into the tailings hopper and moved to the sand tank through pipelines. Then, they are discharged by a sand pump, completing the entire beneficiation process. The good characteristics and advantages of the spiral chute are as follows: 1. It is ultra large and has a large processing capacity. Modern mineral processing objectively requires scale to create benefits. 2. Fine granulation: for the treatment of fine minerals, especially for the treatment of ores with a particle size of -0.047mm, the original machine can generally ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP chutes have developed from simple use of gravity and water blocking force to composite use of centrifugal force, mechanical vibration force, magnetic separation force, etc. Through a composite force field, the enrichment of applicable minerals and the separation of fine particles from these fine particles are enhanced, thereby improving the recovery rate of ore materials. 4. The basic starting point is to save energy, reduce energy consumption and protect the environment. The area and space occupied should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting steps, simple structure, convenient for Computerized maintenance management system. The spiral concentrator is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, an equipment cutting groove, a product gathering hopper or groove bracket (including a cross or triangular frame), etc. The main component is the rotating groove connected by the rotating disc. The spiral plate is made of fiberglass (fiber reinforced coal gangue) and is bolted together. The sorting surface of the spiral groove has a pre made wear-resistant layer. She has the advantages of lightweight, sturdy, and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to evenly sort minerals, making control simple and convenient. The mineral screening device is not limited to being placed on a cross (or tripod) on a supporting table. Uniform mineral mortar is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and selection is carried out. The tail end of the spiral groove is equipped with a valve block type new equipment to obtain the groove. The sorted new products are divided into three (or four) types of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be densely drawn out. The transverse section of the fiberglass chute and the slope change of the curve are extremely suitable for the selection of fine particle materials. 5、 The application scope of fiberglass chute is used for processing 0.6-0.03 millimeters and this vein or placer ore, but it is unfavorable for sorting when the mud content is high. Currently, it has been widely used for processing iron ore, tungsten, tin ore, tantalum niobium ore, coastal and riverine minerals, and gold ore. The spiral chute type is good, The spiral chute type is good

The spiral chute type is good

The spiral chute type is goodRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen