Product information display/Product display

Spiral chute renovation video

24-hour phone/WhatsApp：+8619870423316

Spiral chute renovation video

Video 1 on the Transformation of Spiral Chutes: Describing the Beneficiation Chutes as Belonging to the Inclined Flow Separation Process. Mortar is provided on a inclined chute or slope. Under the driving force of flowing water, the mineral particle group is not tight and layered. The upper layer of light minerals is quickly discharged from the groove, while the lower layer of minerals with a significant proportion are retained in the groove or discharged from the bottom at low speed. After being distinguished and connected, fine ore dressing or tailings can be obtained. Glass fiber reinforced plastic chutes are machinery for mining and beneficiation, especially ideal for mineral mining and beneficiation on beaches, riverbanks, sandbanks, and river beds. The equipment has the characteristics of suitable structure, simple installation, small footprint, simple operation, stable beneficiation, clear beneficiation, large production capacity, high efficiency, high concentration ratio, high recovery rate, and reliable operation. And it has the advantages of light weight, moisture resistance, rust prevention, corrosion resistance, strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The application method is to erect the spiral concentrator, align it with the vertical line, use an iron frame or wood to stabilize it in a suitable position, and use a sand pump to deliver the ore sand to the two feeding ports above the spiral. The sand is mixed with supplementary water to adjust the density of the ore mortar. The ore mortar naturally swirls from high to low, and there is an inertial centrifugal force in the rotating slope flow rate, which varies in density, specific gravity, particle size, and state of the ore sand, The effect of gravity and centrifugal force is achieved through swirling flow, separating the sand from the ore. The selected ore flows into the concentrate hopper and is piped out, while the tailings enter the tailings hopper and are piped to the sand tank. They are then discharged by a sand pump, completing the entire beneficiation process. Video on the Transformation of the 螺旋溜槽改造视频 Spiral Chute III. Advantages and Features: 1. Extremely high efficiency, high recycling rate, and precise beneficiation; 2. No power required; 3. Lightweight, rust proof, durable, wear-resistant, and corrosion-resistant; 4. Low cost operation, long service life; 5 strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The frictional force on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. Spiral chute transformation video 螺旋溜槽改造视频 4. Structural composition: Spiral concentrators are all composed of a feeding device, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove pillar. 5、 The range of spiral chutes used is suitable for separating fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium, gold ore, coal, monazite ore, Rutile ore, zircon, rare earth ore or other metal and non-metallic mineral materials with sufficient specific gravity difference. Spiral Chute Renovation Video 螺旋溜槽改造视频 Spiral Chute Renovation Video