Baryte sorting spiral chute

Baryte sorting spiral chute

The spiral chute for Baryte separation I introduces that gravity separation is grand and applicable to the beneficiation of metal ore and non-metallic ore due to its small environmental pollution and low cost. Glass fiber reinforced plastic chute is one of the gravity beneficiation equipment, with a structural feature of a cubic parabolic cross-section. It is suitable for processing finer particle sizes of -0.2mm. In the sorting step, there is no need to add water to wash, and the bottom of the chute is divided into sections to obtain refined, medium, and tailings. 2、 Use the method to erect the spiral chute, calibrate the vertical line, fix it in the proper position with iron frame or wood, let the sand ore be sent to the two feeding ports on the top of the spiral by the slurry pump, add water, adjust the density of the mineral slurry, the mineral slurry naturally swirls from top to bottom, and generate a single coherent centrifugal force in the rotational slope flow speed, which can be distinguished by the specific gravity, Granularity and state of the mineral sand, Through the gravity and centrifugal force of swirling flow, the ore and sand are separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings are discharged into the tailings hopper and transported to the sand pit through pipelines, and then discharged by a sand pump, completing the entire process of beneficiation. Baryte sorting spiral chute 3. Advantages and characteristics 1. High efficiency, high recovery, correct ore sorting; 2. No power required; 3. Lightweight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low operating costs and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force caused by the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. Baryte sorting spiral chute IV. According to the particle size of processed mineral materials, the chute can be divided into three types: (1) coarse particle spiral chute, the maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can be 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slurry chute, feeding particle size less than 0.074 millimeters. 5、 Use This machine is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon ore, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum niobium, niobium with a particle size of 0.3-0.02mm and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. Baryte sorting spiral chute Baryte sorting spiral chute

Baryte sorting spiral chute

Baryte sorting spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen