Spiral chute with rotation

Spiral chute with rotation

The spiral chute with rotation is widely used in the beneficiation of metal and non-ferrous metals due to its low pollution and low cost. Spiral chute is one of the gravity beneficiation machines, characterized by a cubic parabolic cross-section, suitable for processing finer particle sizes of -0.2 millimeters. During the sorting process, there is no need to add water for flushing, and the end of the chute is divided into sections to select fine, medium, and tailings. 2、 The glass fiber reinforced plastic spiral chute shall be set up with skills, aligned with the vertical line, and fixed in a suitable position with iron shelves or wood. The sand pump shall be used to transport the mineral sand to the two ore feeding ports above the spiral, add make-up water, and adjust the concentration of the mineral slurry. The mineral slurry naturally swirls from high to low. A single coherent centrifugal force appears in the rotating slope flow rate, and the difference in the gravity, Granularity and shape of the mineral sand is obtained, By utilizing the gravity and centrifugal force of the swirling flow, the sand and ore are separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings enter the tailings hopper and are connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire process of beneficiation. Spiral Chute with Rotation 3. Highlights 1. Stable, easy to operate, and wide density range. 2. Large production capacity for mineral processing, ultra-high enrichment ratio, and high recovery rate. 3. The space occupation is not large, the water consumption is small, the structure is simple and simple, and there is no need for power. 4. Easy installation, easy operation, low investment, and fast returns. The spiral concentrator consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, an equipment cutting groove, a product gathering hopper or groove bracket (including a cross or triangular frame), etc. The main component is the rotating groove connected by the rotating disc. The spiral plate is made of fiberglass (fiber reinforced coal gangue) and is bolted together. The sorting surface of the spiral groove has a pre made wear-resistant layer. She has the advantages of lightweight, sturdy, and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to evenly sort minerals, making control simple and convenient. The mineral screening device is not limited to being placed on a cross (or tripod) on a supporting table. Uniform mineral mortar is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and selection is carried out. The tail end of the spiral groove is equipped with a valve block type new equipment to obtain the groove. The sorted new products are divided into three (or four) types of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be densely drawn out. The transverse section of the fiberglass chute and the slope change of the curve are extremely suitable for the selection of fine particle materials. 5、 Application field Spiral chute is suitable for separating fine grained iron ore, ferrotitanium ore, chromite ore, pyrite ore, placer tin, tantalum niobium ore, gold ore, coal, monazite, Rutile, zircon, rare earth and other metal and nonferrous metal minerals with complete density and proportion difference. Spiral chute with rotation Spiral chute with rotation

Spiral chute with rotation

Spiral chute with rotationRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen