Advantages and disadvantages of coal washing spiral chutes

Advantages and disadvantages of coal washing spiral chutes

The advantages and disadvantages of coal washing spiral chutes are as follows: 1. Overview of chute sorting, including inclined flow sorting process. The slurry is fed to a inclined groove or inclined surface with a certain inclination. With the assistance of flowing water, the ore particles are loose and layered. The upper layer of light mineral materials are quickly discharged to the outside of the groove, while the lower layer of minerals with a larger proportion are stagnant inside the groove or slowly discharged from the lower part. After the difference is connected, the selected ore and tailings can be obtained. Spiral chutes are mining and beneficiation machinery, making them ideal for sand mining and beneficiation in coastal areas, rivers, beaches, and streams. The product also has the characteristics of suitable structure, simple installation, small footprint, easy operation, stable beneficiation, clear beneficiation, strong processing capacity, high efficiency beneficiation concentration ratio, high recovery rate, and stable operation. It has the advantages of small weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong adaptability to fluctuations in feed volume or density, Granularity, and grade. 2、 The working principle is that the ore slurry is slowly fed onto the rotating groove surface through the feeding chute installed at the beginning of the spiral groove, and sorting is carried out. The tail end of the spiral groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the selected multi-directional mineral flow to be densely led out. The transverse surface of the fiberglass chute has different slopes, which is very suitable for the separation of fine mineral particles. The advantages and disadvantages of the coal washing spiral chute are three. The characteristics of the fiberglass spiral chute are low power consumption, simple structure, small area occupation, easy operation, stable beneficiation, clear screening of minerals, no movement accessories, easy maintenance and management, large processing capacity per unit size, and other characteristics, which are particularly concerned in many gravity beneficiation machines. The machine has a wide and stable groove surface, and the mortar has a large laminar flow area, which is more suitable for processing medium and fine (-4mm) Granularity ores. Our country has made spiral chutes with diameters of 400, 600, 900, and 1200MM, Ф The output of 1200mm four heads is about 4-6 t/h. The advantages and disadvantages of the coal washing spiral chute are . The structure of the spiral concentrator is composed of six parts: a feed homogenizer, a feed chute, a spiral chute, an equipment selection chute, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the rotating groove has a pre designed durable wear-resistant layer. It has the advantages of lightweight, sturdy, durable, and durable consumer goods that are not easily damaged. A multi tube feeding homogenizer is installed above the rotating groove to sort minerals equally, making it easy to control. The concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The evenly distributed slurry passes through the feeding chute installed at the head end of the spiral groove and slowly feeds onto the rotating groove surface for sorting. The tail of the spiral groove is equipped with a valve type new product acquisition groove, which allows the sorting equipment to be divided into three types (or four types) of new products along the radial direction according to grade. To adjust the orientation of the valve block and change the width of each new product, it is necessary to cut it off. The new equipment gathering bucket is a concentric annular tube that differentially collects and leads selected multi-directional mineral flows. The transverse surface of the fiberglass chute and the slope of the curve change greatly to adapt to the selection of fine-grained materials. 5、 The spiral chute is suitable for processing 0.6-0.03MM and this vein and sand ore, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used for processing iron ore, tungsten, tin ore, tantalum and niobium, beach and riverside mineral sand and sand gold. Advantages and Disadvantages of Coal Washing Spiral Chutes Advantages and Disadvantages of Coal Washing Spiral Chutes

Advantages and disadvantages of coal washing spiral chutes

Advantages and disadvantages of coal washing spiral chutesRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen