Rotating fiberglass spiral chute

Rotating fiberglass spiral chute

Rotating fiberglass spiral chute 1. Overview: The chute sorting of minerals belongs to the inclined surface flow sorting step. The slurry is fed to a inclined chute or slope, and under the push of water, the mineral particle group is loose and layered. The upper layer of light minerals is quickly discharged from the groove, while the lower layer of minerals with high specific gravity stays in the groove or flows out at low speed from the bottom. After each is connected, the selected ore or tailings are obtained. Spiral concentrators are equipment for mining and beneficiation, making them ideal for sand mining and beneficiation in coastal, river, sand banks, and creeks. The equipment has a suitable structure, is installed in a simple and simple manner, occupies a small land area, has simple operability, stable beneficiation, clear separation, strong processing capacity, high efficiency beneficiation enrichment ratio, high recovery rate, and reliable operation. There are also advantages such as lightweight, moisture-proof, rust prevention, corrosion resistance, and strong adaptability to fluctuations in feed volume, concentration, particle size, and grade. 2、 The method is to set up the fiberglass chute, align it with the vertical line, use an iron frame or wood to stabilize it in a suitable position, and use a sand pump to deliver the ore to the two feeding ports on the spiral top. Add water to adjust the concentration of the ore slurry, and the ore slurry will naturally rotate from top to bottom, generating a single inertial centrifugal force in the rotating slope flow rate, based on the differences in the specific gravity, particle size, and state of the sand ore, Through the action of gravity and centrifugal force generated by swirling flow, the sand and ore are separated. The concentrate flows into the beneficiation hopper and is piped out. The tailings are discharged into the tailings hopper and moved to the sand pit through a pipeline, and then discharged by a sand pump, completing the entire beneficiation process. Rotating FRP spiral chute 3. Featured spiral chute has attracted much attention among various gravity separation machines due to its low power consumption, simple structure, small land occupation, simple operation, stable beneficiation, clear mineral separation, no moving parts, convenient Computerized maintenance management system, large production per unit area, etc. The equipment has a wider and flatter groove surface, and the mortar presents a large laminar flow area, making it more suitable for processing medium to fine (-4mm) particle sized ores. Our country has made fiberglass spiral chutes with diameters of 400, 600, 900, and 1200 millimeters, Ф The processing capacity of 1200MM four head is about 4-6 t/h. Rotating glass fiber reinforced plastic spiral chute IV. According to the Granularity of the processed mineral aggregate, the chute can be divided into three categories: (1) Coarse grained chute. The maximum feeding particle size is more than 2-3mm, and the maximum feeding particle size is 100-200mm. (2) The ore chute handles 2-3mm sized ore. (3) Slime chute, feeding Granularity is less than 0.074MM. 5、 The application scope of the spiral concentrator is to process 0.6-0.03mm and vein ores and minerals, but high mud content is unfavorable for beneficiation. At present, it has been widely used for processing iron ore, tungsten, tin ore, niobium tantalum ore, coastal or riverside placer and gold ore, and so on. Rotating fiberglass spiral chute Rotating fiberglass spiral chute

Rotating fiberglass spiral chute

Rotating fiberglass spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen