Which is the best choice for re selecting spiral chutes

Which is the best choice for re selecting spiral chutes

Which is better for re selecting spiral chutes? 1. Overview: Chute sorting belongs to the inclined flow sorting process. The mortar is fed to some inclined grooves or slopes, and with the assistance of water flow, the mineral particles become loose and layered. The upper layer of light minerals are quickly discharged outside the groove, while the lower layer of heavy minerals are retained inside the groove or slowly discharged from the lower part. After each is collected, the selected ore and tailings can be obtained. The fiberglass spiral chute is a mining and beneficiation machine, making it ideal for mining and beneficiation of mineral sand on beaches, river beds, sand banks, and streams. The product has the characteristics of correct structure, simple installation, small footprint, simple operation, stable beneficiation, clear mineral separation, high processing yield, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong adaptability to fluctuations in feed volume, density, Granularity and grade. 2、 The mineral mortar with equal working principles is slowly fed onto the surface of the rotating groove by installing the feeding chute at the end of the spiral groove head, and then selected. The tail of the spiral groove is equipped with a valve block type equipment to select the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each equipment, the product gathering hopper allows the obtained multi head ore flow to be collected and exported separately. The cross section and slope of the curve of the fiberglass chute are very suitable for the sorting of fine particle materials. Gravity concentration spiral chute which is good 3. The characteristics of FRP chute are particularly concerned in various gravity concentration equipment because of its low power consumption, simple structure, less land occupation, simple operation, stable beneficiation, clear beneficiation, no need for moving accessories, convenient Computerized maintenance management system, large production per unit size and other characteristics. The machinery has a wide or relatively flat groove surface, and the mortar presents a large laminar flow area, which is more suitable for processing medium to fine (-4MM) particle size ores. We in China have made spiral concentrators with diameters of 400, 600, 900, and 1200mm, Ф The production capacity of 1200mm four heads is about 4-6 tons/hour. Which company is good for re selecting the spiral chute? The structure of the fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, an equipment cutting groove, a product gathering hopper, and a support bracket (including a cross or triangular frame). The rotating groove connected by spiral blades is a key component. The rotating plate is made of fiberglass (fiber reinforced coal gangue) and connected together by bolts. The spiral groove has a pre made wear-resistant layer on the selected surface. He also has the advantage of lightweight, sturdy, and long-lasting consumables. The rotary groove is equipped with a multi tube ore feeding homogenizer to screen minerals, which is easy to control. The mineral separator does not need to be placed on a cross (or tripod) on a support table. The mineral mortar with an average score is slowly fed onto the surface of the rotating groove through a feeding chute installed at the head of the spiral groove for sorting. The bottom of the spiral groove is installed in a valve block type new product cutting groove, and the selected new equipment will be divided into three (or four) types of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be differentiated, gathered, and led out. The transverse plane of the spiral chute and the slope change of the curve are extremely suitable for the sorting of fine-grained materials. 5、 Scope of application: The spiral concentrator is suitable for processing 0.6-0.03 millimeters of vein ore and this ore sand, but it is unfavorable for separation when the mud content is high. At present, it has been widely used for processing iron ore sand, tungsten, tin ore, tantalum niobium, coastal and riverside ore sand, and placer gold. Which company is better for re selecting spiral chutes? Which company is better for re selecting spiral chutes

Which is the best choice for re selecting spiral chutes

Which is the best choice for re selecting spiral chutesRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen