Product information display/Product display

How to install the fiberglass spiral chute

24-hour phone/WhatsApp：+8619870423316

How to install the fiberglass spiral chute

Introduction to the installation of fiberglass spiral chutes. The beneficiation of fiberglass spiral chutes belongs to the slope flow sorting process. Mortar is fed to some inclined grooves or slopes, and under the push of water flow, the mineral particle group becomes loose and layered. The upper layer of light minerals quickly flows out of the groove, while the lower layer of minerals with high specific gravity remain inside the groove or are discharged from the bottom at a low speed. After separation and collection, selected minerals and tailings can be obtained. The spiral concentrator is a machine for mining and beneficiation, making it ideal for mining ore in bays, river beds, sand banks, and streams. The equipment has the characteristics of correct structure, simple installation, small land occupation, simple operation, stable beneficiation, clear separation, large processing volume, high efficiency, high beneficiation enrichment ratio, high recycling rate, and reliable operation. It has the advantages of light weight, moisture resistance, rust prevention, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 By using the method, the fiberglass chute is erected, aligned with the vertical line, and secured in a suitable position with an iron frame or wood. The mineral sand is transported by a sand pump to the two feeding ports on the spiral, and supplementary water is added to adjust the concentration of the mineral sand slurry. The mineral sand naturally swirls from high to low, and an inertial centrifugal force appears in the swirling slope flow rate, resulting in differences in density, specific gravity, particle size, and morphology of the mineral sand, The gravity and centrifugal force generated by the swirling flow separate the ore, and the concentrate enters the beneficiation hopper and is piped out. The tailings are discharged into the tailings hopper and transported to the sand pit through a pipeline, and then discharged by a mortar pump, completing the entire beneficiation process. How to Install the Glass Fiber Reinforced Plastic Spiral Chute at the Level of 玻璃钢螺旋溜槽咋装 III. New Process for Featured Spiral Chutes. Spiral chutes have attracted more attention in many gravity beneficiation equipment due to their low power consumption, simple structure, small area occupation, simple operation, stable beneficiation, clear screening of ore, no moving parts, easy maintenance and management, and large single area production. The machine has a wide and stable groove surface, and the area where mineral mortar exhibits laminar flow is quite large, making it more suitable for processing medium to fine (-4MM) sized ores. We in China have produced spiral concentrators with diameters of 400, 600, 900, and 1200 millimeters, Ф The processing capacity of 1200mm four heads is about 4-6 tons/hour. How to install the fiberglass spiral chute. According to the processed ore size, the FRP spiral chute can be divided into three types: (1) coarse chute. The maximum Granularity of ore feeding is above 2-3MM, and the maximum can reach 100-200MM. (2) Sand ore chute, processing 2-3 mm particle grade ore material. (3) Slurry spiral chute, feeding particle size ＜ 0.074mm., 5、 Use This product is suitable for separating iron, ferrotitanium, chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin placer, tantalum niobium ore, niobium and other non-ferrous metal ores, rare ore metals or non-metallic minerals with different specific gravity. Installation of fiberglass spiral chute