Mineral processing spiral chute plastic or fiberglass

Mineral processing spiral chute plastic or fiberglass

Mineral processing spiral chute plastic or fiberglass spiral chute iron tailings. Firstly, it describes that gravity separation is widely used in the mineral processing of metal and non-ferrous metals due to its low environmental pollution and low cost. The fiberglass spiral chute is a type of gravity beneficiation machinery, with a cubic parabolic shape in the cross-section. It is suitable for handling finer particle levels of -0.2 millimeters. During the beneficiation process, there is no need to add water for flushing, and the tail of the chute is divided into sections to obtain fine, medium, and tailings. The service life of the spiral chute is determined by two methods: firstly, the fiberglass chute is erected and aligned with the vertical line. Then, an iron frame or wood is used to stabilize it in a suitable position. The sand is pumped to the two feeding ports above the spiral by a sand pump, and supplementary water is added to adjust the concentration of the mineral sand slurry. The mineral sand naturally swirls from high to low, causing an inertial centrifugal force to appear in the swirling slope flow rate, resulting in differences in density, specific gravity, particle size, and morphology of the mineral sand, The gravity and centrifugal force generated by the swirling flow separate the ore, and the concentrate enters the beneficiation hopper and is piped out. The tailings are discharged into the tailings hopper and transported to the sand pit through a pipeline, and then discharged by a mortar pump, completing the entire beneficiation process. beneficiation spiral chute plastic is still fiberglass reinforced plastic. 3. Characteristic 1. The separation process is stable and easy to control. 2. The allowable range of feed density is relatively large. 3. The ultra-high enrichment ratio and recovery rate are high. 4. The area occupied is relatively small and the water consumption is small. 5. Simple structure, no power required 6. Strong processing capacity 7. Simple and understandable installation, simple operation 8. Less investment, quick effect, beneficiation spiral chute plastic or glass fiber reinforced plastic 4. According to the Granularity of processed ore materials, chutes can be divided into three categories: (1) Coarse grained chutes, the maximum Granularity of feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) Mineral sand chute, handling 2-3 mm sized ore materials. (3) Slurry chute, with a feeding particle size less than 0.074MM. 5、 Scope of application. The dressing spiral chute plastic or glass fiber reinforced plastic spiral chute is used to separate fine grained iron ore, titanium iron ore, chromite ore, pyrite ore, sand tin, tantalum niobium ore, placer gold mine, coal mine, monazite, Rutile, zircon ore, rare earth ore or other metal and non-metallic ore with sufficient Density contrast. Mineral processing spiral chute plastic or fiberglass Mineral processing spiral chute plastic or fiberglass

Mineral processing spiral chute plastic or fiberglass

Mineral processing spiral chute plastic or fiberglassRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen